Pairing Instructions

Here are some step-by-step instructions to help you through the pairing process.

If you have already downloaded the Peace by Hampton app and created an account, skip to Step 3.

To Pair Your Camera:

1. Download the Peace by Hampton app from the Play Store or App Store on your smart device.
2. Create a Peace by Hampton account by opening the app and clicking "Register."
3. Install the Micro-SD card and connect the power supply. Using the pin key, press the reset button until you hear the prompt from the camera speaker. 
4. From the 'Home' page in the app, click on the "+" in the top right-hand corner of the page.
5. Click on 'Indoor Camera.'
6. Verify your WiFi Network information is correct.
7. Check Scan QR Code in the app and click next.
8. A QR code should appear on your smart device; hold the screen 4-8 inches from the camera.  
9. You should hear a toned prompt confirming that the camera successfully scanned the code; click "I Heard a Prompt".
10. Click done in the top right.
11. Place or install your camera where you wish.

NOTE: Your camera must be plugged in to operate; the camera does not have batteries.