2. Setup the username and password, for your Array account.
Ensure that your smart device is connected to the same WiFi the Array will be connected to.
3. Once logged in to the app, you will be prompted to "Add a Place". This is the location where your Array lock is installed.
a. You will have the option to change the Place icon.
b. Name the Place.
c. Add your address manually or select "Current location".
d. Select Done(iOS) or the check mark(Android).
4. Next, you will select your newly added "Place".
a. For iOS users, you will immediately see "Add a lock". Select it.
b. For Android users, you will need to select the options icon "" in the bottom right-hand corner and then select "Add a lock".
Array App Setup Steps
Step 1 and 2. Watch the videos in the Array By Hampton app for further instruction.
Step 3. The Array lock will need to be in "discovery mode" for the App and smart device to detect the Array lock. You can find the instructions for "discovery mode" in Step 2 or click here. Select the discovered lock and select continue.
Step 4. Select the Wifi for your Lock and enter the WiFi password. Select Next.
Step 5. Enter the "tethering code" that you see on screen. If the Array beeps before completing the code, press the lock button on the Array and start again. When done, press Next.
Step 6. Name your lock, press Next.
Step 7. Select a preferred lock. Your preferred lock will work with the notifications in the Array app.
Step 8. Power Saving. The power saving feature is set to High. Low Battery Power Save and Nighttime Power save are enabled. You can change this later in Lock settings. Select Next.
Step 9. Congratulations! Select Finish.